Square Flange Uniform Feeding Impeller Feeder

Basic Info

Model NO.	400*400mm
Motor Power(kw)	20~25
Installation Slope	10
Chute size(mm)	6000×1300
Overall Dimension	6082×2580×2083
Name	Dust-Proof Evenly Feeding Rotary Valve
Model	Hgy-500*500
Capacity	7~106 M3/H
Vane Rotating Speed	34rpm
Feeding Size	200~500mm
Motor Power	1.1~4kw
Lubrication	Lubricating Grease
Applied Material	Mining, Quarry, Agriculture, Chemical, Bulk Materi
Material	Wear-Resistant, Casting Material
Inlet and Outlet	Square Flange or Round Flange
Driving Mode	Electrical
Connection Form	Flange
Structure	Single-Eccentric Sealing
Seal Form	Auto Sealed
Valve Stem	Normal
Transport Package	Seaworthy, Wooden Package, Wooden Box
Specification	ISO9001: 2000/ CE
Trademark	YUANBEN
Origin	Henan, China (Mainland)
HS Code	8483600090
Production Capacity	10 Sets Per Week

Product Description

Square Flange Uniform Feeding Impeller Feeder

Henan Yuanben Intelligent Technology (hereinafter referred to as Yuanben) is a specialized manufacturer that focuses on designing and manufacturing intelligent vibrating screening equipment. The company is committed to the processing, production, research& development and design of new intelligent vibrating screen. Yuanben is located in the national center city, Zhengzhou, it owns more than 20 technical engineers, and cooperates deeply all along with Henan Pingyuan Mining Machinery which has years of dedicated production experience, in addition, Yuanben has its own processing research and development base.
''Build industry with wisdom, create value with wisdom'', under the promotion of "Internet+" concept, Yuanben will deeply integrate ''intelligence + digitalization'' to build an intelligent workshop and realize the intelligence of overall process. While strengthening its own equipment automation intelligence, driving the transformation and upgrading of screening industry, the industry intelligent development should be also jointly promoted.
Get a price at once!Introduction

Square Flange Uniform Feeding Impeller Feeder

The rotary valve is used for continuous and even feeding of dry materials in the form of powder or small particles from the upper bin into the next piece of equipment. It is an auxiliary conveyor device. It is widely used as feeding equipment for a materials system in cement, building materials, chemicals, metallurgy and light industries.

Principle

The rotary valve is a constant feeder. This machine is equipped with a BLY series cycloidal-pin gear speed reducer, and it connects rigidly with the main shaft through the output shaft, driving the main shaft and impeller to rotate. The main shaft and impeller rotate simultaneously when the motor is rotating on the impeller. Materials in the upper bin enter into the trough of the impeller through the feed inlet and are conveyed to the outlet by the rotating impeller.

Structure

Firmly structured and exquisitely designed, this machine is assembled with a shell, impeller, end cover of the main shaft and other components, and is equipped with a BLY series cycloidal-pin gear speed reducer.

Technical data

Model	Capacity m³/h	Vane rotating Speed (r/min)	Feeding Size(mm)	Motor model	Motor Power(kw)	Motor rotating speed (r/min)
HGY-200*200	7	34	200*200	BLY18-43	1.1	34
HGY-200*300	10	34	200*300	BLY18-43	1.1	34
HGY-300*300	23	34	300*300	BLY18-43	1.1	34
HGY-300*400	31	34	300*400	BLY18-43	1.5	34
HGY-400*400	53	34	400*400	BLY22-43	3	34
HGY-400*500	67	34	400*500	BLY22-43	3	34
HGY-500*500	106	34	500*500	BLY22-43	4	34

Installation Notes

1, the rotary valve must be kept clean, especially the inner body of main case.
2, check all fasteners to ensure that the connection is reliable, the machine is (including motor) with good grounding.
3, the flange under and upper the vane feeder must be fixed firmly, make the whole machine is in a state level at the same time
4, check the wiring of motor, make it has start conditions.

Operation notes

1.Pay attention that when start the power supply if motor high heats, you have to stop and inspect, so as not to affect normal operation of the speed reducer.
2.If powder leakage phenomenon is found on the shaft, you should tighten the packing gland bolts on both ends.
3.During operation , check the heat of bearing place, general bearing temperature rise shall not be more than 60 ºC.
4.During operation, if you find abnormal vibration, please stop and exclude it.
5.If found that bolt looseness in the process of operation, it should be tighten.

Lubrication of Rotary valve

Oil in sufficient 00# lithium lubricating grease, within 6-10 months of being put into use, the transmission and bearing parts of rotary valve should be replaced and the grease also need be changed. If rotary valve works in a high ambient temperature, humid or too much air return, please shorten the time of changing the new grease.

During operation, please check the lubrication parts every month.

Above mentioned lubrication time is just the minimum requirements, detailed time should be flexible and depends on the operation condition.

List of Lubrication parts

No.	Name of Lubrication part	Lubrication material	Lubrication part cycle	Lubrication method
1	Coupling	2# lubricating grease	1000 hours	Lubricator
2	Bearing seat	3# calcium base grease	1 month	Lubricator
3	Gearmotor	00# lithium lubricating grease	6 months	Lubricator

Get a price at once!
Factory Pictures

Square Flange Uniform Feeding Impeller Feeder

Get a price at once!

Products

Basic Info

Product Description